Our Custom Configuration Process
Each Power & Data Rail setup is designed and optimized to meet your specific needs. Our design experts will guide you through every step making sure that you get a customized solution to fit the demands of your work space. Contact us if you have any questions or would like to place an order.
Power & Data Pole
The telescoping vertical pole conceals and distributes power and data connections from the ceiling to the Power & Data Rail to support workstations anywhere in your business, even locations far from wall outlets. Eliminate the need to route power across floor surfaces when the Rail isn't near a wall or column electrical outlet.
Features
Telescoping height adjustable pole - compatible with ceiling heights between 8' and 12' high. The Pole extends far enough for a 12' high dropped ceiling
Scalable power and data system - add components as your needs grow
Lightweight extruded aluminum tubing with steel mounting brackets
Requires at least one Power & Data Rail - the pole can be added to any configuration and joined to a rail in multiple ways
High electrical & ethernet capacity - supports wiring for up to four 20-amp power runs and up to 16 ethernet data cable runs. The standard configuration is 20 amps of power fed to the 4 duplex outlets. It's possible to custom wire the Pole with up to 80 amps, please to order for more than 20 amps
Purchase and installation of the Pole can occur at any time - during or after the initial Power & Data Rail deployment
Compatible with both Byrne 8-Trac and Dekko 8-Wire UL183 recognized electrical systems - we recommend and typically use Byrne, but we can specify Dekko to prevent delays if there are supply lead time issues with Byrne
Let's outfit your space - we offer free design and planning services
15-year warranty - all UPLIFT Desk products include a 15-year warranty
Empower your office
The Power & Data Pole can be added to any configuration of the Power & Data Rail system. Attach the Pole directly to the Rail's posts using the included brackets:
Attach the Pole to any open side of a post where no Rail is attached
Attach the Pole on any post along the Power and Data Rail row whether the post is in middle of a Rail or at the ends of the row Rail
The Rail's feet have benching capabilities to lay out UPLIFT V2 Standing Desks in a row, providing a 4" gap between the sides of desks for the Pole to be located in.
Rail features
A simple solution can be purchased on this page, it's composed of one Pole and one Rail and delivers 4 duplex outlets of power anywhere in your open office space (2 duplex outlets on each side of the rail).
Both the Short and Long Rail are height adjustable from 17" to 24" vertically (measured from the floor to the top of the post)
Short Rail is width adjustable and telescopes 16.75" (34.75 - 51.5" wide between inside of posts)
Long Rail is width adjustable and telescopes 31" (51.75 - 82.75" wide between inside of posts)
Included data kit to optionally route and furnish two jacks/couplers for ethernet or other data ports on the face of the rail, see Byrne Data Kit Instructions (pdf). If you choose not to install data into the rail, a blank plate is provided to cover the unused data port windows in the Rail
Power & Data Pole configuration gallery
