15 year warranty
Ships same business day if ordered by 3pm Central
Overview
60" x 30" Walnut Solid Wood Standing Desk
Details
The Enfield Single Monitor Arm ergonomically positions your monitor for increased comfort and productivity. Adjust the height, angle, and distance of a monitor quickly and easily to minimize stress on the neck, shoulders, and torso—and to keep eyes from straining to see monitor text that is too far away.
Height: Make sure that the top line of your monitor is at or just below eye level. Tilting your head backward to read your screen leads to neck discomfort.
Distance: Place your monitor screen roughly an arm's length (fingertip reach) away. Positioning the screen too far away will cause you to have trouble seeing the monitor, and your eyes will pull your head forward causing you to extend your neck, often leading to neck, back, and shoulder discomfort.
Angle: Adjust screen angle to minimize glare from lights and windows.
Read more on How to Position Your Screen Ergonomically (pdf).
The Enfield Monitor Arm has 9.8" of vertical adjustment range provided by a smooth operating, gas assisted spring arm that counterbalances a monitor perfectly.
By floating the monitor above the desk, valuable desktop space in the primary and secondary reach zone is reclaimed from bulky monitor stands. More usable workspace contributes to enhanced organization, productivity, and comfort.
Primary Zone: Stretching approximately 15" to 17" from the user, this zone is best for items that are used most often (like a keyboard and mouse).
Secondary Zone: This zone reaches approximately 27" away from the user. The user can reach items in this zone without leaning. It's a good space for a phone, coffee cup, water bottle, reference notebooks, or calculator.
Tertiary Zone: The third zone ends about 42" to 45" from the user and is a great place for lamps, sunglasses, or books.
Sturdy, modern, and elegant, the Enfield brings value in both form and function.
The Enfield Single Monitor Arm can pivot a full 360˚ at the base, or you can engage the 180˚ stopping pin to prevent the arm from rotating past the back edge of the desk.
Wire management channels are integrated into the upper and lower arms to keep your workspace free of stray cables.
Cable routing and allen wrench holders are located behind the base when the monitor arm is mounted to your desktop using the Clamp-On method.
Choose from two included mounting options:
The Clamp-On method clamps the monitor arm to the edge of the desktop. The clamp works with desktops ranging from 0.4" - 3.3" in thickness.
The Bolt-Through method attaches the monitor arm anywhere on the desktop or table using an existing hole (such as a grommet hole) or a new bolt hole that you drill in an ideal location. The bolt-through method works with desktops ranging from 0.4" - 3.1" in thickness.
Left: Clamp-On Method. Right: Bolt-Through Method
We understand the frustration of holding a monitor up with one hand while trying to fasten it onto the VESA plate with the other-so we've eliminated the need to do that.
The quick-release VESA plate greatly assists with monitor installation. Instead of holding the monitor up to the monitor arm to fasten with screws, attach the VESA plate to your monitor first, and then slide the VESA plate onto the monitor arm. The VESA mount accommodates standard 75mm and 100mm mounting patterns and includes a mechanical lock for visual indication that your monitor is securely attached to the arm.
The Enfield Single Monitor Arm supports monitors weighing between 4.4 lb to 19.8 lb.
A convenient indicator displays the level of spring tension to determine how to adjust for the weight of your monitor during installation.
Videos
Warranty + Returns
Assembly
Specs
| Warranty | 15 year warranty on all UPLIFT Desk products Warranty page |
| Specifications | Enfield Single Monitor Arm Specifications (pdf) |
| Height range (low, high) | 8.7" to 18.5" high, measured from the desk surface to the center of the monitor mount |
| Vertical height adjustment | 9.8" total height difference from the low to the high |
| Monitor weight capacity | 4.4 - 19.8 lb. This will accommodate the vast majority of monitors |
| VESA compatibility | Included standard 75mm and 100mm quick-release VESA plate Optional 200mm x 100mm VESA plate is available for larger monitors |
| Mount & desk thickness compatibility | The hardware for both mounting methods is included
|
| Bolt-through hole diameter | 0.4" - 3.1" |
| Height adjustment mechanism type | Mechanical Spring |
| Forward reach | 21.1" from the center of the vertical post to the VESA plate with the monitor extended directly out towards the front of the desk |
| Side extension | 18.3" from the center of the post to the center of the VESA plate with the monitor extended directly out to the left or right |
| Collapsible | 4.6" |
| Swivel of arm at base | 360˚ or 180˚. Engage the stopping pin to prevent the monitor arm from pivoting more than 180˚ |
| Monitor tilt range | 80˚ (+/-40˚) |
| Monitor pan range | 180˚ (+/-90˚) |
| Monitor rotation | 360˚ |
| Monitor arm weight |
|
| Testing | BIFMA X5.5-2021 for Desk Products |
| Shipping dimensions & weight | 17.5" L x 9.4" W x 5" H, 9 lb |
FAQ
Yes, the Enfield Single Monitor Arm is compatible with both UPLIFT and non-UPLIFT desks, as long as the desktop meets the thickness specification and is sturdy enough for the clamp or bolt-through mount:
Yes, the Enfield Dual Monitor Arm has the same features and a similar range of adjustability.
The monitor width for a dual monitor arm is not unlimited like the Enfield Single Monitor Arm. If you have monitors wider than 32" (measured diagonally), you can use two Enfield Single Monitor Arms. This enables you to place the bases far enough apart to accommodate wide screens and still maintain adjustability. For maximized positioning flexibility we recommend two Enfield Single Monitor arms.
The quick-release VESA mount makes attaching a monitor simple. Fasten the included VESA plate to the back of your monitor, then slide the VESA plate into the mount at the end of the monitor arm and lock it into place.
This feature also makes changing or moving monitors much easier. Turn the knob to unlock and slide it off the monitor arm.
The base should not move if installed properly, but there is no way to lock the swivel of the arm joints. The monitor tilt adjustment can be tightened so that the angle will not change if bumped.
Distance: Place your monitor screen roughly an arm's length (fingertip reach) away. Positioning the screen too far away will cause you to have trouble seeing the monitor and your eyes will pull your head forward causing you to extend your neck; this often leads to neck, back, and shoulder discomfort.
Height: Make sure that the top line of your monitor is at or just below eye level. Tilting your head backward to read your screen leads to discomfort.
Angle: Adjust screen angle to minimize glare from windows and light sources.
Read more on How to Position Your Screen Ergonomically (pdf).
Single Arm
Product Page | Instructions (pdf) | Specifications (pdf) | Comparison Chart (pdf)
Dual Arm
Product Page | Instructions (pdf) | Specifications (pdf) | Comparison Chart (pdf)
We stand firmly behind the quality of our products. All UPLIFT Desk products come with a 15 Year Warranty, visit the Warranty page for the full policy.
Free Returns with Free Return Shipping within 30 days, visit the Returns page for the full policy.
|
|
|
|
|
| Slim, attractive design | USB Kit add-on option Compatible with a large range of monitors | Long reach Compatible with a large range of monitors | Elegant, modern design with spring tension indicator |
| Weight capacity: 4.4 to 11 lb | Weight capacity: 2.2 to 33 lb | Weight capacity: 4.5 to 17.5 lb | Weight capacity: 4.4 to 19.8 lb |
| Supports any monitor size within weight range | Supports any monitor size within weight range | Supports any monitor size within weight range | Supports any monitor size within weight range |
|
Clamp mount: Compatible with 0.75" to 3.75" thick desktops
Bolt-through mount: Compatible with 0.6" - 2.1" thick desktops |
Clamp mount: Compatible with 0.4" to 3.3" thick desktops
Bolt-through mount: Compatible with 0.4 to 1.8" thick desktops |
Clamp mount: Compatible with 0.75" to 3.75" thick desktops
Bolt-through mount: Compatible with 0.6"-2.13" thick desktops |
Clamp mount: Compatible with 0.75" to 3.75" thick desktops
Bolt-Through mount: Compatible with 0.6" - 2.13" thick desktops |
| VESA compatibility: 75mm and 100mm Quick Release | VESA compatibility: 75mm and 100mm Quick Release | VESA compatibility: 75mm and 100mm Quick Release | VESA compatibility: 75mm and 100mm Quick Release |
|
|
|
|
|
