
Ships Free (US 48)
Before ordering parts please determine which UPLIFT Desk Frame you own.
Take a look at the left or right side of your frame, if you DON'T see the UPLIFT Desk logo near the top of the frame then it is a V1 frame.
If you DO see a logo, you have either a V2 or V2-Commercial Frame.
The V2 frame DOES NOT have a lower-crossbar that spans between the legs at about knee height.
The V2-Commercial frame DOES have a lower-crossbar that connects the legs together at knee height.
Raise your height adjustable desk to the highest peaks of productivity, but don't forget the feet.
These replacement leveling studs, or glides, attach to the bottom of the frame foot, so you can make slight height adjustments for a perfectly level desk, ending wobble that might come from uneven floors.
Construction | V1 & V2 leveling studs: Steel upper & composite plastic base V2-Commercial leveling studs: All composite plastic |
Stem | M8x15mm threaded stem |
Yes, technically you can use either leveling stud on any UPLIFT Desk frame since the threaded stem is the same size. The leveling stud for the V2-Commercial frame is a bit thinner and is needed to meet the ANSI/BIFMA G1-2013 height standards for that frame.
Nothing, just the name. Both offer adjustment in height when floors are uneven to keep the desk from rocking.
Most desk issues can be solved quickly by following our desk reset and troubleshooting instructions. These steps can be completed in just a few minutes. If you still need assistance, please contact us.
We stand firmly behind the quality of our products. Desks have a 10 Year warranty (desktops have a 5 Year warranty), visit our Warranty page for the full policy.
Free Returns with Free Return Shipping within 30 days, visit our Returns page for the full policy.