BlogHow to Set Up an Ergonomic Craft Space | UPLIFT Desk
How to Set Up an Ergonomic Craft Space | UPLIFT Desk
June 8, 2018
Ergonomic craft space with the UPLIFT Height Adjustable Craft Table.

How to Set Up an Ergonomic Craft Space

Hours of sewing, painting, or model building can leave your neck, back, and shoulders sore, even when the project itself is relaxing. An ergonomic craft space keeps your work at the right height, your body supported, and your supplies within reach, so you can stay focused on the project.

1. Start with a height-adjustable craft table

The UPLIFT Height Adjustable Craft Table is the foundation of an ergonomic craft space. The 60 x 30-inch solid rubberwood top gives you room to spread out a project, and the V3 frame adjusts from 22.6 to 48.7 inches, so you can sit or stand without setting your work aside.

Three drawers and two hinged compartments add more than two cubic feet of storage for fabric, paper, and tools, and slightly beveled edges are easier on your wrists and forearms during detailed work. Learn more in our craft table overview.

UPLIFT Height Adjustable Craft Table with built-in drawers and storage.

2. Set the right work height for each task

Start with the surface at about elbow height, with your shoulders relaxed. From there, adjust for the task: a slightly higher surface brings detailed work like painting or beading closer to your eyes, while a slightly lower surface lets you press down when cutting fabric or rolling clay.

Use the Ergonomic Calculator to find your ideal sitting and standing heights, then save your favorite heights as presets on the desk keypad to switch between tasks with one touch.

3. Perch at standing height with a drafting chair

Clarksville Ergonomic Drafting Chair at a raised craft table.

The Clarksville Ergonomic Drafting Chair by UPLIFT Desk lets you sit at a raised work surface without lowering the table. A height-adjustable foot ring with a rubber lining gives your feet a stable place to rest, and four-position lumbar support keeps your lower back supported while you lean in over a project.

4. Keep moving with an active stool

Engage Stool beside a craft table.

The Engage Stool by UPLIFT Desk rocks and pivots in any direction, so you can lean in, reach across the table, and shift positions as you work.

The seat adjusts from 21.8 to 31.4 inches, and integrated handles make the 12.2-lb stool easy to move from one side of the table to the other.

5. Light the work surface

Good lighting reduces eye strain and the urge to hunch closer to your work. The LED Desk Lamp E3 by UPLIFT Desk adjusts from a warm 2700K to a cool 6500K, with a touch slider on the base to set the brightness.

Tilt the head to aim light right where you need it, and charge your phone from the USB port while you work.

LED Desk Lamp E3 lighting a craft project.

6. Stand comfortably with an anti-fatigue mat

Active Anti-Fatigue Mat E7 in front of a craft table.

Standing on a hard floor during long projects strains the legs and feet. The Active Anti-Fatigue Mat E7 by UPLIFT Desk relieves that pressure and adds movement to standing time.

Massage mounds stretch the arches, power wedges stretch the calves, and a rest bar props up one foot at a time.

7. Add storage around the room

Sequence Shelves holding craft supplies.

Once the table is set, give bulkier supplies a home nearby. Sequence Shelves by UPLIFT Desk come in 40-inch and 76-inch heights with 30-inch-wide shelves that each hold up to 50 lbs, so yarn bins, paint sets, and finished pieces all have a place.

Mix short and tall units, then add extensions as your collection grows. Shelves come in GREENGUARD Gold Certified laminate and bamboo finishes that coordinate with UPLIFT Desk desktops.

8. Tie the space together with accent seating

A second seat makes the room more welcoming for a friend who stops by, or for a break between steps of a project. The Rivervue Chair by UPLIFT Desk comes as a side chair or an armchair with a wood or caster base, and the wide, low-seated Rivervue Lounge Chair by UPLIFT Desk turns a corner into a spot to sketch or plan.

Rivervue Chair in a craft room.

Make movement part of every project

Even the best setup works better when you change positions. Alternate between sitting, perching, and standing as you move through a project, and take short breaks to stretch your hands, wrists, and shoulders. For more on seated posture, see how to sit properly at your desk.

Build your craft space

Start with a craft table that adjusts to every project.

Shop the Craft Table

Work better. Live healthier.