Clamp-On or Under-Mount Power with USB

Enjoy power that's easy to access at your desk with Clamp-on or Under-mount Power with USB.

Ships same business day if ordered by 3pm Central



Clamp-On or Under-Mount Power with USB

  • Power outlets conveniently located above or below the desk
  • Two ways to mount:
    • Use the included clamp to attach above the desk along the rear or sides.
    • Use the included under desk mounting bracket to position power underneath your desktop.
  • Two power outlets and two USB outlets to power a variety of devices at your desk. USB has shared 5V/2.1A charging output
  • The clamp mount fits any desk edge from 0.74" to 1.75" thick
  • 10' long power cord for safe height adjustments without snagging or pulling (ETL safety listed for the U.S. and Canada)
  • The clamp mount fits any desk edge from 0.74" to 1.75" thick. Clamp mount includes an anti-slip neoprene pad to protect the desktop surface from scratches. Tool-free installation - just twist bottom knobs to tighten
  • 15 year warranty - all UPLIFT Desk products include a 15 year warranty
Sit to stand desk power outlet solution
The Clamp-On or Under-Mount Power with USB by UPLIFT Desk

Power Where You Need It

This versatile power supply fits where you want it, with tool-free installation and removal. Just twist the bottom knobs to tighten or loosen the clamp. Clamp to any desk edge 0.74" to 1.75" thick (that's any UPLIFT desktop!). The anti-slip neoprene pad keeps your desk beautiful by cushioning and protecting the surface from scratches.

Use the included under-mount bracket to position underneath your desktop, towards the front edge to be easily accessed or towards the rear of your desk to be out of sight.

To convert to an under-mount power source, remove the top cover and clamp attachments by loosening the four set screws on the back of the plates and slide each attachment off to the left or right.

If you have a pre-drilled UPLIFT desktop, you can attach the undermount bracket to the non-utilized pre-drilled keypad holes (they are drilled for on both the left and right). This makes for a simple installation that's mounted flush with the edge of your desktop. Or mount them anywhere you prefer.

Convenience, Flexibility, & Beauty In One Package

End the frustration of searching for an outlet. Two power and two USB outlets located right where you need it. The 10' cord allows the freedom to raise and lower your standing desk without worrying about snagging cables or yanking the plug out of the outlet as you raise and lower your desk. Choose where to mount your outlets, above or below your desktop.

Add power outlets to height adjustable desks



Warranty + Returns





Input types Two power outlets and two USB ports
USB output 5V/2.1A output, shared
Voltage rating 120 volts, 12 amps
Cord length 10' long
Certifications ETL (U.S and Canada)
Shipping dimensions 10" L x 8" W x 4" H, 3 lb


Frequently Asked Questions

  1. Will this fit my desk?

    This power hub will fit any desk we make, and most other desktop thicknesses, as well. If your desktop is between 0.74" and 1.75" thick, the Clamp-on Power will fit it. The under desk mount works on any desk with sufficient space to mount it under the front edge of the desktop; The Under-mount mounting plate is 5.5" wide x 2.7" deep.

  2. How do I attach this to my desk?

    Clamp-on Mount: From the top of the desk looking down, fasten the Clamp-on Power to any desk edge by turning the knobs counterclockwise, placing the open clamp on your desk edge, and turning the knobs clockwise to close it. The anti-slip neoprene pad will protect your desk, so it stays pristine when you want to reposition your power hub.

    Under Desk Mount: Start by removing the pre-installed top cover and clamp attachments from the unit, they are removed by loosening the four set screws on the back of the plates and sliding each attachment off to the left or right. The under desk mounting version of the top cover has four predrilled holes in the top to interface with your desk's keypad mounting holes. We provide pre-drilled holes for your keypad on both sides of the desktop, so this will utilize the holes on the opposite side from the keypad. Line the bracket up to the holes of your desk and use the provided screws to fasten it. If you'd rather locate it somewhere else we recommend that you pre-drill holes into your desktop then attach. Be sure to tighten the screws to be completely flush with the bracket as any protrusion of the screws could scratch the power unit. Finally, slide your power unit onto the desk mounted bracket, replace and tighten the set screws on the back of the assembly to fasten the unit in place.

  3. Do I need Clamp-on or Under-mount Power?

    This product let's you decide where you want the power! Mount it above the desk at the rear or on the sides of the desktop. Or mount under the desktop. If you've ever run out of outlets while you're at your desk, then you've experienced the need for more power outlets. And with a height adjustable workstation that raises and lowers, having a power hub that remains on your desk helps you protect your cords from pulling and snagging. If your cords come unplugged, the Clamp-on Power with USB is a great solution to keep you plugged in. Lastly, its 10' long cord will keep you securely connected to power, give you plenty of slack, and save you a wall outlet, too.

  4. Is this a surge protector?

    This is a power hub, not a surge protector. If you need additional protection from power surges, we recommend the 8-Outlet Mountable Surge Protector by UPLIFT Desk.

Clamp-on Power or Under-Mount with USB by UPLIFT Desk


Why Buy?

This power unit clamps onto the edge of most desks or underneath, making it easy to add two power outlets and two USB charging ports anywhere you need them.

Features & Specs

  • Beats most computer USB ports: 5V/2.1A device charge
  • Clamp fits desks 0.74" to 1.75" thick
  • 10' cord helps prevent snagging and pulling when raising desk
uplift clamp-on power


UPLIFT Desk Warranty Policy

We stand firmly behind the quality of our products. All UPLIFT Desk products come with a 15 Year Warranty, visit the Warranty page for this particular product's warranty policy.

Return Policy

Free Returns with Free Return Shipping within 30 days, visit our Returns page for the full policy.



Clamp-On or Under- Mount Power with USB
Power Hub with USB Shop Now >
Wireless Charging Power Hub Shop Now >
4-Port USB 3.0 Hub Shop Now >
Power Grommet Shop Now >
PDC003 PDC007 PDC010 ACC013 PDC002
15 year warranty 15 year warranty 15 year warranty 15 year warranty 15 year warranty
5.5" W x 2.7" D x 2" H
(3.7" H with Clamp mount)
5.75" W x 4" D x 1.5" H 6.25" W x 6" D x 3" H 3" W x 1.63" D x 0.45" H 3.72" OD x 2.6" H
2 Outlets 2 Outlets 2 Outlets 0 Outlets 2 Outlets
2 USB Ports 4 USB Ports 3 USB Ports 4 USB Ports 0 USB Ports
5V 2.1A shared USB output 4.8A shared USB output 5V 4.8A shared (2.4A max per port) USB 1.1, 2.0, and 3.0 compatible N/A
120V, 12A 120V 120V N/A 120V
10 feet cord 5 feet 5 feet 4.5" 4.8 feet

ETL listed for US and Canada

ETL listed for US and Canada

ETL listed for US and Canada


UL listed for US and Canada

Clamp-on and under-mount Freestanding Freestanding Freestanding Fits in desktop grommet hole

No wireless charging

No wireless charging

Wireless charging

No wireless charging

No wireless charging