Ships same business day if ordered by 3pm Central
Overview
A J3 Ergonomic Chair with Blade Chair Casters
Take your chair to the next level in mobility and comfort. The blade style polyurethane wheels and high precision ball-bearings create a nearly frictionless roll, ideal for harder surfaces like low pile office carpet, ceramic tile, laminate, hardwood, concrete, vinyl, and chair mats (not as recommended on thick carpet).
Ball-bearing swivels under the stem help the casters change direction quickly, and the axle bearings make for an effortless and long-lasting roll.
High precision wheel hub ball bearings for quiet operation.
The large diameter wheels and polyurethane wheel material allow for superior rolling over uneven floor surfaces and obstacles.
Wheel material won't scratch hardwood floors like typical hard plastic casters.
Keep hardwood floors free of scratches
These casters press into the chair base on almost any office chair. Installing the Blade Chair Casters is a breeze. Pull out the old chair casters and push the Blade Chair Casters into place. No tools, no fuss.
Purchase the Blade Chair Casters when you purchase your UPLIFT Ergonomic Chair and simply install them instead of the included standard casters.
The 11mm diameter x 22mm long stem with retaining ring is an industry standard which will accommodate most office and ergonomic chair bases and brands.
And of course, the Blade Chair Casters are compatible with all UPLIFT Ergonomic Chairs, including Intuition, Pursuit, Vert, J3, and Facet.
Videos
Warranty + Returns
Assembly
Specs
| Warranty | 15 year warranty on all UPLIFT Desk products Warranty page |
| Product dimensions & weight |  0.5 lb per caster Blade Chair Casters Specifications (pdf) |
| Wheel size | 3" wheel diameter |
| Wheel construction | Molded plastic hub with molded polyurethane wheel |
| Housing construction | Powder coated steel |
| Stem dimensions | 11mm diameter x 22mm long |
| Weight capacity | 270 lb (per set of 5 casters) |
| ANSI/BIFMA certification | ANSI/BIFMA X5.1-2017 Certified - meets rigorous performance requirements |
| Shipping dimensions & weight | 8" L x 5" W x 3.75" H, 2.8 lb |
FAQ
These casters can be used on virtually any type of floor. These are especially great on hard surfaces and can protect those surfaces from scratches and damage often caused by hard plastic casters. However, we recommend you don't use them on thick carpeting.
In most cases, the Blade Chair Casters will add about 1" of height to your chair depending on your chair's caster size. The Blade Chair Casters are 3.75" high once installed, not including the stem.
The Blade Chair Casters were tested to ANSI/BIFMA X5.1-2017 standards at a weight of 270 lb for a set of five casters (complete chair). Please refer to your chair's maximum allowable weight. If your chair is rated higher than 270 lb, then use the caster weight limit. If your chair is rated lower than 270 lb, use the chair weight limit.
No, unlike our desk casters which do include a lock so the desk stays in place, the Blade Chair Casters do not include locks. This way you're free to roll.
Yes, as long as your chair accepts the 11mm diameter by 22mm long stem type caster, you can put these on any office chair. Remember that these come in a set of five casters, in case your chair base has more than five spokes.
No, these casters are available only in a set of five.
Product Page | Instructions (pdf) | Specifications (pdf)
We stand firmly behind the quality of our products. All UPLIFT Desk products come with a 15 Year Warranty, visit the Warranty page for the full policy.
Free Returns with Free Return Shipping within 30 days, visit the Returns page for the full policy.
